|
Product Details:
|
| Product Name: | Portable Ultrasonic Hardness Tester | Model: | HUH-6M |
|---|---|---|---|
| Main Hardness Scale: | HV | Testing Range: | HV50~1599, HRC20~68, HB85~650 |
| Battery: | 3.6V, 3000mAh Lithium Battery | Display: | 3.5 Inches Large LCD Screen |
| High Light: | uci portable hardness testing machine,lcd portable hardness testing machine,lcd portable hardness testing equipment |
||
HUH-6M UCI hardness test Portable Ultrasonic Hardness Tester hardness test instrument
Characteristics of UCI method
1. Directly test Vickers hardness value of workpiece, and there is no need to convert like Leeb or Shorehardness tester. The conversion error is eliminated.
2.High test speed -- output test results within seconds
3.Standard Vickers indentation, tiny indentation, little damage to the workpiece
4.The test results are related to the elastic constants of the workpiece. New workpiece needs to be calibrated according to the elastic constants.
5.Small volume, light weight and easy to carry.
6.Easy to test on assembly line.
7.It can be used for testing on site and testing large workpiece and can be used to make hardness measurements on positions difficult to access, such as tooth flanks or roots of gears.
8.Only measuring the hardness condition of the surface contacted
9. The development of microcontroller technology makes it easy to calibrate workpiece with different elastic constants.
Ultrasonic Hardness Tester
Host and Accessories
Ultrasonic hardness tester is composed of host, probe and probe connection cable.
The probe is connected to the host with an eight-core connection cable for signal transmission. The host adopts a color display with rich display content.
There are nine buttons on the front of the host to operate.
A USB interface is on the side of the host for charging and communication.
The charge lamp near the USB interface is used to indicate charging status.
| Probe | 1kgf manual probe | 2kgf manual probe | 3kgf manual probe | 5kgf manual probe | 10kgf manual probe |
| Accessory | Optional | Standard | Optional | Optional | Optional |
| Test force | 9.8N | 19.6N | 29.4N | 49N | 98N |
| Diameter | 22mm | 22mm | 22mm | 22mm | 22mm |
| Length | 150mm | 150mm | 150mm | 150mm | 150mm |
| Resonating rod diameter | 2.4mm | 2.4mm | 2.4mm | 2.4mm | 2.4mm |
| Maximum roughness of test surface | Ra<3.2μm | Ra<5μm | Ra<5μm | Ra<10μm | Ra<15μm |
| Minimum workpiece weight | 0.3kg | 0.3kg | 0.3kg | 0.3kg | 0.3kg |
| Minimum workpiece thickness | 2mm | 2mm | 2mm | 2mm | 2mm |
| Application | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Ion nitriding die,formwork, fixture,thin-walled workpiece,bearing,tooth flanks, pipeline | Groove, tooth flanks, roots of gears | Small forgings, foundry materials, weld inspection,HAZ, low requirement for roughness |
| Model | Ultrasonic Hardness Tester | |||||||||||||||||||||||||||||
| Test range: |
HV50-1599,HRC20-68,HB85-650,HRB41-100,HRA61-85.6, HS34.2-97.3,MPa255-2180 |
|||||||||||||||||||||||||||||
| Accuracy | ±4%HB,±1.5HR,HV please refer to the table below | |||||||||||||||||||||||||||||
|
Accuracy |
|
|||||||||||||||||||||||||||||
Application
1.Hardness test of flange edge and gear root stamping parts, mold, thin plate, face-hardened gear tooth, gear groove and taper part
2.Hardness test of axle and thin-wall pipes and vessels
3.Hardness test of wheels and turbine rotors
4.Hardness test of bit edge
5.Hardness test of welding parts
6.Measure the depth of deep hole with certain aperture, concave and convexwith large radians, and irregular plane
7.Hardness test of most ferrous and nonferrous metals and their alloys in industrial production
8.Hardness test of thin coatings
9.etc.
Contact Person: Ms. Shifen Yuan
Tel: 8610 82921131,8613910983110
Fax: 86-10-82916893
