Payment & Shipping Terms:
|Detector:||BOOST Si-PIN Detector||Range Of Detection:||25 Elements Between Ti And Bi.|
|Dimensions:||254 X 79 X 280 Mm（L X W X H）||Data Processing:||32GB Memory USB, Bluetooth, WIFI...|
|Model:||HXRF 120||Excitation Source:||50KV/200μA Maximum|
PMI SDD Detector,
HXRF 120 SDD Detector,
SDD Alloy Material Identification Detector
Hand-held Alloy Analyzer HXRF 120, Alloy Analyzer Alloy Material Identification (PMI) SDD Detector
1. Small, light and easy to carry.
2. High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis.
3. High-performance X-ray Tube, Ultra-high Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution.
4. Indicator lights flash on both sides for safety purposes during measurement, i.e., the built-in double beam technology will automatically sense whether there is a sample at the measurement window.
5. Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight in the field. At the same time, people don't need to take off gloves when they are opreating machine in some particular environment.
6. HXRF-120 utilizes anti-slip, abrasion resistance and streamlined design, which is light and easy to carry. It also integrates the new high speed digital multi-channel technology, the new library grade base identification system and the super-FP algorithm. These features allow it to measure elements faster, with higher accuracy and greater repeatability.
7. Intelligent battery management exerts a real-time monitoring of the residual capacity of battery and backup battery through MSBUS bus.
8. Automatic switch to standby mode when not used and recovery after the machine is picked up, which saves power and extends working time; moreover, HXRF-120 has a gravity sensing system which shuts down instrument automatically when it accidentally falls down, another safety consideration; HXRF-120 will also give out alarm when ambient temperature or humidity exceeds the scope of application.
9. HXRF-120 adjusts air pressure factor automatically based on altitude it has detected. This function increases excitation effect of light elements by 40% and that of rare earth elements by 30%.
10. HXRF-120 is supportive to battery hot plug, hence battery can be replaced without powering off the machine.
11. On HXRF-120, users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin of products and batch number).
12. HXRF-120 is built with double beam technology which can automatically sense whether there is a sample at the measurement window. This is also a safety and protection feature. The brightness of the display of HXRF-120 is automatically regulated according to environment brightness.
13. HXRF-120 can be configured and maintained in a remote way via Internet.
14. HXRF-120 can build a three dimensional element content distribution graph allowing for a fast estimate of mineral reserves or the extent of geological disaster with the built-in GPS for latitude and longitude reading combined with a 3rd party GIS analysis software.
15. HXRF-120's new algorithm optimizes the spectral resolution, so lower detection limits can be achieved, which are comparable with even large-scale lab instruments.
16. HXRF-120 Ultra-short optical path design can significantly improve light element excitation effects, without the fall/fill condition.
17. HXRF-120 has a built-in environmental sensing system covering conditions such as temperature, dust humidity and others.
|HXRF-120 elements analyzed|
|Scope of elements in standard test mode can be extended if there is such a need.|
|HXRF-120||can analyze Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, Re, Pb, and Bi, total 25 elements.|
HXRF-120's built-in alloy library contains 380 kinds of alloys, as well as other special alloys for mold, electric power, petrochemical and other industries, which simplifies the conversion of alloys from one country to another. Besides, it has two built-in libraries that the users can define by themselves to extend alloy brands. Therefore, it can extend to as many as 600 alloy brands and test more than 1,000 kinds of alloy materials.
|Dimensions||254 x 79 x 280 mm(L x W x H).|
|Excitation source||50KV/200μA maximum pipe pressure pipe flow can be adjusted freely,Ag target (standard),Au,W,Rh target(optional).|
|Detector||BOOST Si-PIN detector|
|Range of detection||25 elements between Ti and Bi.|
Industrial resistive touch screen with screen size of 4.3".
Proprietary operating system software and sound waves.
Multiple languages including English and Chinese.
And it automatically adjusts display brightness according to the environment brightness.
USB, Bluetooth, WIFI, or liked to the Internet; instrument can be configured and repaired remotely.
Data can be exported via EXCEL or PDF. Users can customize the reports by adding their company logos, addresses, test results,
spectrum and others (such as product description, origin and batch number).
|Heat dissipation||Equipped with a dedicated T-shaped radiator to dissipate the heat no need to wait for cooling of detector time again.|
Built-in double beam technology can automatically sense whether
there is a sample at the measurement window. This is also a safety and protection feature.
Waterproof, dust-proof and shockproof suitcase
HUATEC Safety Band；
|Power supply system||
Intelligent battery management through MSBUS bus, real-time
monitoring of the residual capacity of battery and backup battery. The battery complies with air transport regulations of dangerous goods.
A single battery can last 8 hours.
Contact Person: Mr. Davis Chen