|Charging Time:||3 Hours||Single Package Size:||37X23X9 Cm|
|Single Gross Weight:||5.000 Kg||Power Supply:||220V50Hz 12V|
|Using Battery:||4.4AH||Battery Life:||More Than 6 Hours|
ndt magnetic particle flaw detector,
huatec magnetic particle flaw detector,
yoke magnetic particle flaw detector
HUATEC Magnetic Yoke Flaw Detector HCDX-Y7
HCDXseries magnetic yoke flaw detectors is the portable miniature magnetic detection equipment,which uses magnetic yoke to magnetize workpiece made of ferromagnetic materials. The equipment can magnetize various parts and is applicable to the petroleum, chemical, metallurgy, aerospace, shipbuilding, railway, electric power, coal, machinery, standardize parts, aircraft manufacturing, automobile parts, boiler and pressure vessel these industry products. The equipment makes magnetic particle inspection on the surface and the near surface defect, the defect is caused by forging, quenching, welding and fatigue, such as a chain rod, crankshaft, bearing, high strength bolt, spring, forgings, petrochemical pipe fittings, valves, blades, gear, roller, chain and Welding seam these geometric complex workpieces.
HCDXseries magnetic yoke flaw detector consists of AC (Alternating Current), DC (Direct Current), AC-DC magnetic yoke flaw detector. DC power supply is the rechargeable battery, applicable to site operation in the field with no power supply and the containers, bridges, pipelines that high pressure cannot enter in. If charging one time the continuous work can be up to more than 6 hours. AC power supply uses AC~220V power supply direct input, no other ancillary equipment and with easy, convenient operation, it is light weight and easy to carry, so the equipment can be widely used.
Magnetic Yoke Flaw Detector
Magnetic Yoke Flaw Detector
|Power supply||/||220V50Hz 12V|
|Charging power supply||220V 50Hz||220V 50Hz|
|Charging time||/||3 hours|
|Battery life||/||More than 6 hours|
|Max duty cycle||50%||50%|
|Magnetic electrode distance||0~210mm||0~210mm|
|Lifting power||A C||>5.5kg||>5.5kg|
|Host||1 set||1 set|
|Certificate of conformity||1||1|
|Warranty card||1 copy||1 copy|
Operation and Cautions
Before using, the movable joint pin part shall be added a small amount of lubricating oil.
Pressing the switch after the probe pole head has kept good connection with the workpiece, timely releasing the switch before the probe has left the workpiece. To avoid the equipment overheating fault damage caused by improper operation.
V Charging method and low battery judgment
After connecting the charger (adapter) with the battery, the charger (adapter) plug is inserted into the 220V socket, the red light on the charger turns on, when red light turning green it indicates the end of charging, the charging time is about 3 hours.
When in the use of battery box power supply, the battery indicator display 10%, it needs to be charged, the charging time is about 3 hours
|Address :||7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096|
|Worktime :||9:00-18:00(Beijing time)|
|Business Phone:||86-10-82921131(Working time) 86-13910983110(Nonworking time)|
Contact Person: Mr. Davis Chen