|Product Name:||Calibration Block||Type:||V2 (A4) Block|
|Material:||Duplex Stainless Steel 1018 Carbon Steel, LY12/6063/7075 Aluminum,304 Stainless Steel||Standard:||BS 2704 Block A4, Fig. 4, And AS 2083,DIN54122|
|Dimensions:||75mm X 43mm X 12.5mm/20mm/25mm||Packing:||ABS Engineering Plastics|
ndt calibration blocks,
ultrasonic reference blocks
IIW V-2 A4 Ultrasonic Calibration Block for on-site checking of miniature shear wave probe index, time base, beam angle and gain
Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic standards UT blocks, European standard UT block, NDT block, hexagonal testing block, and so on. Processing of the special specifications UT block
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 2.5mm and 50 mm radius, 1.5mm hole (or 3mm or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
Dimensions: 75mm x 43mm x 12.5mm
Net Weight:0.5kg Gross Weight:0.75kg Approximate Weight( Carbon Steel)
Made from 1018 carbon steel, or LY12/6063/7075 aluminum, or 304 stainless steel. Duplex stainless Steel
Also available in 20mm and 25mm thicknesses for calibration of non-miniature probes.
Contact Person: Mr. Davis Chen