China Non Destructive Testing Equipment

• 

  Digital Non Destructive Testing Equipment Portable Vibration Calibrator 10hz - 1khz

  Accuracy:±5%±2

  Power:1pc 3.6V lithium battery, currency:10~40mA

  Continuous working time:20 hours

  Contact Now
• 

  Single Sided / Double Site Portable Vibration Meter With Dynamic Balancing

  Rotate Speed Range: Standard Form:60～20000r/min

  Quality Range:Standard Form: >1KG Reinforced Type:>50g

  Residual unbalance:Quality is 1mg,Vibration value:speed:0.01mm/s

  Contact Now
• 

  Micro Computer Vibration Analysis Equipment High Speed On Line Balance Equipment

  Memory Capacity:1000M

  Display:6.4inch LCD display,640×480pixels

  Touch Screen:Full screen touch operation

  Contact Now
• 

  On Line Dynamic Balancing Equipment , 320 × 240 Pixels Vibration Meters Handheld

  Memory Capacity:512M

  Display:3.5inch LCD display,320×240pixels

  Touch Screen:Full screen touch operation

  Contact Now
• 

  Handheld Non Destructive Testing Equipment Vibration Calibrator 56mm X 200mm

  Operating Frequency:159.2 Hz ± 0.5 %

  Acceleration Output:10 m/s² (RMS) ± 3%

  Velocity Output:10 mm/s (RMS) ± 3%

  Contact Now
• 

  Hg601 Non Destructive Testing Equipment Hand Held Vibration Tester Easy Operation

  2 Channel:2 Channels Simultaneous Sampling & Display

  Display:On-site 400-lines FFT Spectrum And Waveform Display; Transfer Function Analysis

  Storage:Data Storage: 240 1024-point Time Waveforms

  Contact Now
• 

  Dual Channel Portable Vibration Analyzer Balancer Hg601a On Site Data Collector

  Dual Channel:1 Or 2 Plane On-site Balancing,Dual-channel Vibration Analyzer

  Battery:Rechargeable Battery, 6.5 Hours Continus Working Time

  Storage:400 Vibration Value Sets & 400 Waveforms Of 1600 Samples

  Contact Now
• 

  Intgrated Non Destructive Testing Equipment Vibration Transmitter Hg-808a

  Transverse Sensitivity Max:<5%

  Case:Stainless Steel, Air-tight ; Ground Isolated

  Measurement Range:50, 100; 150 M/s2

  Contact Now
• 

  Small Size Bearing Fft Vibration Analyzer / Data Collector Hg-911h Iso10816

  Noise Level (without Vibration Input):ACC<0.25 M/s2, VEL<0.5mm/s, Disp<1m

  Frequency Response Accuracy:5% + 2 Digits

  Non-linearity:5% + 2 Digits

  Contact Now
• 

  Multi Parameter Non Destructive Testing Equipment Condition Checker Vibration Meter

  Accuracy:+ 5% + 2 Digits

  Acceleration:0.1 To 100 M/s2 / 0.01 To 10 G / 10Hz~3kHz Peak

  Velocity:0.1 To 250 Mm/s / 0.01 To 15 Inch/s / 10Hz~1000Hz RMS

  Contact Now
• 

  Hgs911hd Vibration Analyzer Balancer , True Rms Measurement Fft Spectrum Analyzer

  Noise Level (without Vibration Input):ACC<0.25 M/s2, VEL<0.5mm/s, Disp<1m

  Frequency Response Accuracy:5% + 2 Digits

  Pickup:Accelerometer With Extension Stinger And Magnetic Mount, Optional Tacho-sensor

  Contact Now
• 

  4 Channel Portable Vibration Meter , Continuous Vibration Monitoring System

  Overall Value Output:4-20mA Or 1-5V

  Case:2.stainless Steel, Air-tight, Electrical Isolation To Reduce Ground Disturbance

  Working Temperature:-20~80 OC

  Contact Now