|
Product Details:
|
| Range: | 0 μm To 800 μm (0 Mils To 30 Mils) | Accuracy: | ±5% Or ±5 μm, (whichever Is The Greater) |
|---|---|---|---|
| Resolution: | 1 μm (0.1 Mils) | Measurement Speed: | >30 (readings Per Minute) |
| PC Interface: | RS232C | ||
| Highlight: | handheld blast cleaned surface profile gauge,digital blast cleaned surface profile gauge,blast cleaned surface profile gauge |
||
SRT-5100 Handheld Digital Blast Cleaned Surface Profile Gauge
Detailed Product Description
* This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.
* It meets the standards of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results.
* The tungsten carbide tip will last for up to 20, 000 readings and can then be easily replaced by the user in the field.
* Cost per test is significantly lower than other test methods.
* Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement.
* Can communicate with PC for recording, printing and analyzing by the optional software and cable for RS232 interface. USB adaptor and Bluetooth interface can also be used.
* Automatic power off to conserve power.
* Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there maybe an insufficient key to produce adequate adhesion, leading to premature coating failure . Ensuring the correct surface preparation optimises the performance of the coating and material usage.
SPECIFICATIONS:
echnical parameters:
| Item | Description | |
| SRT-5100 | ||
| Measuring Range | 0 -800μm | |
| Resolution | 1 μm (0.1 mils) | |
| Gauge face diameter | 50mm | |
| Accuracy | ±5% or ±5 μm | |
| Power | 4x1.5v (AAA) battery | |
| Interface | RS232/USB, bluetooth | |
Standard Accessories :
Main unit……………...1pc.
Carrying case…………1 pc.
Operation manual…….1 pc.
Optional accessories:
RS232C cable, USB adaptor, Bluetooth interface
Contact Person: Ms. Shifen Yuan
Tel: 8610 82921131,8613910983110
Fax: 86-10-82916893
