Home Products

Non Destructive Testing Equipment

Best Products

Digital Vibration Calibrator Calibrate Vibration Meter Vibration Analyzer Vibration Tester ISO10816 HG-5010

China Non Destructive Testing Equipment

Mortar Test Hardness And Strength Concrete Test Hammer

Test range:1.0~25Mpa

Standard impact energy:0.196J(0.02kgf.m)

Stroke of rebound hammer:75mm
HTH-225E Digital Concrete Compressive Strength Test Hammer

Standard impact energy:2.207J

Tension spring stiffness:785 N/m

Stroke of impact hammer:75 mm
HS-A High Resolution Rubber Shore Durometer

Test range:0-100 HA

Available test range:10-90 HA

Stroke:2.5 mm
Non Destructive Surface Roughness Analyzer with Ra Rq Measuring Range

Filter:RC、PC-RC、GAUSS、D-P

Maximum drive stroke:17.5mm/0.7inch

Length of sampling l:RC、PC-RC、GAUSS、D-P
HUATEC ARM Processor SRT-6671 Surface Roughness Measurement Instrument Precision

Filter:RC、PC-RC、GAUSS、D-P

Maximum drive stroke:17.5mm/0.7inch

Maximum display resolution:0.001μm
SRT-6671 Large Range Multi Parameters OLED Display Surface Roughness Tester

z-axis measuring range:±20μm、±40μm、±80μm

Maximum display resolution:0.001μm

Length of sampling l:0.25mm,0.8mm,2.5mm
HRD-DGZY Portable High-strength Aluminum Alloy Elevator Rope Tension Meter

Min. Load Division Value:1N

Scientific measuring range:10%~90%

Accuracy:≤±5%
HRT-DS Digital Ropes and Steel Wire Ropes Tension Tester

Rope Diameter:¢6～¢40mm.

Accuracy grade:3～6% of maximum function (depending on the rope form and features).

measurement accuracy:3% error or less
HUA-100 Digital Portable X Ray Film Transmission Density Densitometer

Range:650Cd/m - 320 000 Cd/m

Density:4.50D - 5.00D

Accuracy:±0.03D
RJ33-1015 Multifunctional Rays, Α, Β, X, And Γ Radiation Geiger Counter Detector

X, γ dose rate range:0.1 µSv/h～5mSv/h

X, γ sensitivity:≥20cps/(uSv/h)

X, γ energy range:0～3 MeV
TG-5700 Digital Ultrasonic Thickness Gauge Handheld High Precision With A/B Scanning

Measuring range (45# steel):0.15mm – 1800mm

Indication error（＜10mm）:±0.005mm

Indication error（≥10mm）:±0.1%
YM-B5 Penetration Comparison Standard Test Block CE

Test standard:ISO 3452-3:1998(E),JB/T6064

Width target value:0.5µm

Depth:100µm

Page 20 of 58|< << 15 16 17 18 19 20 21 22 23 24 >> >|

Browse Categories：

Non Destructive Testing Equipment

Digital Vibration Calibrator Calibrate Vibration Meter Vibration Analyzer Vibration Tester ISO10816 HG-5010

China Non Destructive Testing Equipment

Mortar Test Hardness And Strength Concrete Test Hammer

HTH-225E Digital Concrete Compressive Strength Test Hammer

HS-A High Resolution Rubber Shore Durometer

Non Destructive Surface Roughness Analyzer with Ra Rq Measuring Range

HUATEC ARM Processor SRT-6671 Surface Roughness Measurement Instrument Precision

SRT-6671 Large Range Multi Parameters OLED Display Surface Roughness Tester

HRD-DGZY Portable High-strength Aluminum Alloy Elevator Rope Tension Meter

HRT-DS Digital Ropes and Steel Wire Ropes Tension Tester

HUA-100 Digital Portable X Ray Film Transmission Density Densitometer

RJ33-1015 Multifunctional Rays, Α, Β, X, And Γ Radiation Geiger Counter Detector

TG-5700 Digital Ultrasonic Thickness Gauge Handheld High Precision With A/B Scanning

YM-B5 Penetration Comparison Standard Test Block CE

X-Ray Flaw Detector

XXQ-2005 Portable X-Ray Flaw Detector for weld inspection with anti - jamming

Industrial X - Ray Film Viewer Computer Real Time Radiography System

Mini Glass X Ray Generator Tube for NDT Flaw Detector Accessories

Ultrasonic Calibration Blocks

Ultrasonic Flaw Detector / UT Calibration Blocks IIW V1 ( A2 ) Type DIN 54-120 BS2704

IIW V-2 A4 75mm x 43mm x 12.5mm Ultrasonic Calibration Block / ultrasonic test blocks

10 - Step Wedge calibration block for thickness and linearity calibration