Memory Capacity:1000M
Display:6.4inch LCD display,640×480pixels
Touch Screen:Full screen touch operation
Memory Capacity:512M
Display:3.5inch LCD display,320×240pixels
Touch Screen:Full screen touch operation
Operating Frequency:159.2 Hz ± 0.5 %
Acceleration Output:10 m/s² (RMS) ± 3%
Velocity Output:10 mm/s (RMS) ± 3%
2 Channel:2 Channels Simultaneous Sampling & Display
Display:On-site 400-lines FFT Spectrum And Waveform Display; Transfer Function Analysis
Storage:Data Storage: 240 1024-point Time Waveforms
Dual Channel:1 Or 2 Plane On-site Balancing,Dual-channel Vibration Analyzer
Battery:Rechargeable Battery, 6.5 Hours Continus Working Time
Storage:400 Vibration Value Sets & 400 Waveforms Of 1600 Samples
Transverse Sensitivity Max:<5%
Case:Stainless Steel, Air-tight ; Ground Isolated
Measurement Range:50, 100; 150 M/s2
Noise Level (without Vibration Input):ACC<0.25 M/s2, VEL<0.5mm/s, Disp<1m
Frequency Response Accuracy:5% + 2 Digits
Non-linearity:5% + 2 Digits
Accuracy:+ 5% + 2 Digits
Acceleration:0.1 To 100 M/s2 / 0.01 To 10 G / 10Hz~3kHz Peak
Velocity:0.1 To 250 Mm/s / 0.01 To 15 Inch/s / 10Hz~1000Hz RMS
Noise Level (without Vibration Input):ACC<0.25 M/s2, VEL<0.5mm/s, Disp<1m
Frequency Response Accuracy:5% + 2 Digits
Pickup:Accelerometer With Extension Stinger And Magnetic Mount, Optional Tacho-sensor
Overall Value Output:4-20mA Or 1-5V
Case:2.stainless Steel, Air-tight, Electrical Isolation To Reduce Ground Disturbance
Working Temperature:-20~80 OC
Accuracy:5%
Acceleration Amplitude(RMS):9.81m/s2（1g）±3%
Output Waveform:Sine Waveform
Test range:1.0~25Mpa
Standard impact energy:0.196J(0.02kgf.m)
Stroke of rebound hammer:75mm
