Home Products

Non Destructive Testing Equipment

Best Products

Digital Vibration Calibrator Calibrate Vibration Meter Vibration Analyzer Vibration Tester ISO10816 HG-5010

China Non Destructive Testing Equipment

FJ-45WF-2 Radioactive Contamination Detector for Water and Food

Detector:45mm * 70mm NaI detector+Marinelli cup

Dose rate range:0.1-20 μ Sv/h (relative to Cs-137)

Measurement accuracy:3% to 6%
DA312 Ultrasonic Thickness Probe 10MHz 0.6-50mm Range

Working temperature:- 20℃-60℃

Frequency range:10MHz

Measurement range:0.6-50mm
HAP-1000XP/HAP-2000XP Automatic Metallographic Grinding Polishing Machine

Rotate speed:50-1000 RPM reverse rotation can be switched

Sample plate speed:30-200 RPM reverse rotation can be switched

Working air source pressure:More than 0.6MPa
DA235 Lemo 00 Microdot Cable for DA312 Probe

usage:DA312 probe

interface:Lemo 00 -Microdot

Minimum Order Quantity:1 pc
AWS Ultrasonic Weld Seam Probe 45° 60° 70° Angles 2-2.5MHz

Wedge Angle:45°、60° and 70°

Frequency range:2 - 2.5MHz

Minimum Order Quantity:1 pc
HDL-380 Film Dryer with 8 Air Flow Channels for NDT

Film development speed:40-240s adjustable

Sheet feeding width:360mm

Moving speed:950mm/min (running time: 40 seconds)
TG-M80 Water-cooled Wall Magnetic Crawler Thickness Measurement System

Thickness measurement:The maximum length is 80 meters and can be customized

Maximum vertical load:25kg

Maximum frontal pulling force:40KG
CX-230 Magnetic Particle Test Piece QQI ASTM E1444 Low-Carbon Steel

Standard:ASTM E1444/E1444M-11

thickness:0.002inch

material:Low-carbon steel
DA301 Ultrasonic Wall Thickness Probe 5MHz 1.2-200mm Range

Working temperature:-5℃—50℃

Frequency range:5MHz

Measurement range:1.2-200mm
DA231 Dual LEMO 00 Cable for DA301 Probe

usage:DA301 probe

interface:Dual LEMO 00-LEMO 00

Minimum Order Quantity:1 pc
HDG-200C Far Infrared Film Drying Oven 220V 2000W

Working voltage:220V AC, 50Hz

Working temperature:0-60℃ adjustable (drying film temperature shall not be higher than 60℃)

Heater power:2000W
High-Temperature Lemo 01-Microdot Dual-Cable for NDT Equipment

interface:Lemo 01-Microdot

Minimum Order Quantity:1 pc

Packaging Details:Carton packing box

Page 6 of 76|< << 1 2 3 4 5 6 7 8 9 10 >> >|

Browse Categories：

Non Destructive Testing Equipment

Digital Vibration Calibrator Calibrate Vibration Meter Vibration Analyzer Vibration Tester ISO10816 HG-5010

China Non Destructive Testing Equipment

FJ-45WF-2 Radioactive Contamination Detector for Water and Food

DA312 Ultrasonic Thickness Probe 10MHz 0.6-50mm Range

HAP-1000XP/HAP-2000XP Automatic Metallographic Grinding Polishing Machine

DA235 Lemo 00 Microdot Cable for DA312 Probe

AWS Ultrasonic Weld Seam Probe 45° 60° 70° Angles 2-2.5MHz

HDL-380 Film Dryer with 8 Air Flow Channels for NDT

TG-M80 Water-cooled Wall Magnetic Crawler Thickness Measurement System

CX-230 Magnetic Particle Test Piece QQI ASTM E1444 Low-Carbon Steel

DA301 Ultrasonic Wall Thickness Probe 5MHz 1.2-200mm Range

DA231 Dual LEMO 00 Cable for DA301 Probe

HDG-200C Far Infrared Film Drying Oven 220V 2000W

High-Temperature Lemo 01-Microdot Dual-Cable for NDT Equipment

X-Ray Flaw Detector

XXQ-2005 Portable X-Ray Flaw Detector for weld inspection with anti - jamming

Industrial X - Ray Film Viewer Computer Real Time Radiography System

Mini Glass X Ray Generator Tube for NDT Flaw Detector Accessories

Ultrasonic Calibration Blocks

Ultrasonic Flaw Detector / UT Calibration Blocks IIW V1 ( A2 ) Type DIN 54-120 BS2704

IIW V-2 A4 75mm x 43mm x 12.5mm Ultrasonic Calibration Block / ultrasonic test blocks

10 - Step Wedge calibration block for thickness and linearity calibration