Detector:High performance silicon drift SDD detection module
Analyze the main elements in the alloy:can analyze Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta, W, Re, Pb, and Bi,total 30 elements (can be added further)
Analytical methods:Direct reading analysis method+basic parameter method(FP)
Measuring range:0.01-200 μSv/h
Display range:0.001-200.000 μSv/h
Cumulative dose:0-1000kSv
Detector type:ZnS coating, thin film plastic scintillator detector
Measuring range:0.01~9999kCPS,0.01~9999kBq,0.01~9999k Bq/cm2
Detection efficiency:α: ≥35% (241Am),β: ≥35% (36Cl)
Magnetic electrode distance:45~225mm
Power cord length (spring wire):3m
Temperature rise:Handle surface temperature ≤40 ° C
Circumferential magnetization current (A):5000
Longitudinal magnetization MMF (AT):12000、16000、18000
Optional coil inner diameter (mm):350、400、500
Spatial resolution:≥50lp/cm
Gray level:≥7
Atmospheric pressure range:500hPa ~ 1060hPa.
diameter range of wire rope:φ1.5-300mm (need to configure different series of specifications sensor)
accuracy:99.99%
allowable repeatability error:±0.055%
Product name:Infrared thermometer
Model:HIR900
Temperature range:-50 to 950℃
Detector:φ40mm ×60mm NaI scintillator
Energy resolution:better than 7.5%
Lead shield:20mm thick, 4πSr lead shield
Measuring range(μm):0-500,0-1500,0-3000
Display accuracy:0.1 um(0 ~ 99.9 um),1um(100 ~ 10000 um),0.1g/㎡(model TG-6105P)
Calibration Mode:Zero, One-Point, Two-Point and Basic Calibration
Product name:Infrared Thermometers
Temperature range:-50 to 950℃
Response Time:500ms
Drying Temperature:50℃-55℃-60℃ adjustable
Drying Speed:100S-135S-280S adjustable
Washing Mode:Tab water, 2L/min